Skip to main content

Poly Edge E100, E200, E300, E400, and E500 Series

Place a Call

You can place and answer calls on your phone usingUsing the handsethandset:, headset, or speakerphone, and you can alternate among the three modes during calls, if available.

Do one of the following:

    1. Pick up the handset and presshandset.
    2. Enter the image.png , image.png key, or the New Call softkey. Then, enter the phone number and press the Send softkey.soft key.

    Using the speakerphone:

    1. With the handset on-hook, enter the number.
    2. EnterPress the phonespeaker button image.png or the Dial soft key.

    You can alternately press the New Call soft key, enter the number and press the Dial Sendsoftkey. Then,soft pick upkey.

    Using the handset,Headset:

    1. With the headset connected, press the headset button image.pngto activate headset mode.
    2. Enter the number and press forthe speakerphoneSend orsoft for headset.key.

Answering a Call

You can place and answer calls on your phone usingUsing the handsethandset:, headset, or speakerphone.

  • Pick up the handset, then pressheadset.

Using the Answerspeakerphone:

  • Press the speakerphone keyimage.png softkey.
  • Press, the SpeakerphoneAnswer softkey, keyor image.pngthe flashing line key.

Using the headset:

  • PressWith your headset connected, press the Headset key image.png

Answer a Call When in a Call

When you’re in an active call and an incoming call arrives on the same or a different line, a call waiting tone beeps and the Incoming Call screen displays.

  • Select Answer and the active call goes on hold, and the incoming call becomes active.

Answer a Call from an Expansion Module

  • Press the expansion module line key that has the flashing green LED indicator.


End Call

Using the handset:

  • Hang up the handset or press EndCall .soft key.

Using the speakerphone:

  • Press the Speakerphone keyimage.pngor the EndCall soft key.image.png

Using the Headset:

  • Press the Headset keyimage.pngor the image.pngEndCall soft key.

Redial

    1. Press the right navigation arrow to open the Placed Calls list or press the Recent Calls soft key.
    2. Select number to redial using the navigation arrows and press the MenuDial andsoft thenkey on selected number.Redial.

Call Hold

To place a call on hold:

  • Press Hold soft key or image.png during an active call.

To resume the call, do one of the following:

  • If there is only one call on hold, press Resume or image.png.
  • If there is more than one call on hold, highlight the desired call and press Resume or image.png.

Resume a Call on an Expansion Module

  • Press the line key corresponding to the line with the held call.

Call Transfer

You can transfer a call in the following ways:

Blind Transfer: Transfers the call directly to another line without speaking with the other party first.

  • Press the Transfer soft key or the transfer image.png key.
  • Enter the extension to which you want to transfer.
  • Press the Send soft key to complete the transfer or Cancel to return to the caller.

Consultative Transfer: Enables you to speak with the other party before completing the transfer.

  • Press the Transfer soft key or the transfer image.png key.
  • Press the Consultative soft key.
  • Enter the extension to which you want to transfer.
  • Press the Send soft key to continue the transfer or Cancel to return to the caller.
  • If the call is answered, press the Transfer soft key to complete the transfer or the Cancel soft key to cancel the transfer and return to the original caller.
  • If the call is unanswered, press the Cancel soft key to return to the original caller.

Voicemail Transfer

    Transferring to a 4-Digit Extension:

    1.  Press the MoreTransfer softbutton.
    2. Press keyBlind untilTransfer.
    3. Dial you*90 seefollowed by the T2VMrecipient's softextension keynumber.
    4. Press Send or wait for the call to complete.

    Transferring to a 5-Digit or 6-Digit Extension:

    1.  Press the T2VMTransfer soft key.button.
    2.  Enter the extension you want to transfer to.
    3.  Press the EnterBlind softTransfer.
    4. Dial key.* Thefollowed callerby hasthe beenrecipient's transferredextension number.
    5. Press Send or wait for the call to the voicemail of the extension you entered.complete.

Call Forward

Forward a call:

  • On the Incoming Call screen, press the Forward softkey.
  • Enter the number to forward the call to.
  • Press the Forward softkey.

To forward all calls:

  • Press the More soft key.
  • Then press the Forward soft key.
  • Press 1 or the select button to choose:
    • Always - Forwards all incoming calls.
    • No Answer - Forwards all unanswered incoming calls.
    • Busy - Forwards incoming calls when you're in a call.
  • Enter the campus extension to which you want to forward your calls.
  • Press the Enable soft key.

For shared lines, you can only choose Always as your forwarding type; the other forwarding options aren’t available for shared lines.

To cancel call forward:

  • Press the More soft key.
  • Then press the Forward soft key.
  • Press 1 or the select button to choose Always..
  • Press the Disable soft key to turn off call forwarding.

Call Conference

Imitate a Conference Call:

  • Call a contact.
  • When the contact answers, select the Conference softkey. The phone places the call on hold.
  • Enter another contact’s number, select a contact from the directory, or select a contact from the call lists.
  • When the contact answers, select the Conference softkey. All call participants are added to a conference call.

Join Calls to Create a Conference Call:

  • If you have multiple held calls, select the call you want to include in the conference call.
  • Select the Join softkey.

The active call and selected held call join into a conference. If you have multiple held calls, the other held calls on the line remain held.

Hold a Conference Call:

  • Select Hold.

When you place a conference call on hold, the phone places all conference participants on hold.

Resume a Conference Call:

  • Select Resume.

Resuming a held conference call enables all participants to rejoin the call.

Split a Conference Call:

  • During a conference call, select the Split softkey.

Splitting a conference call ends the conference and places the participants on hold in individual calls. You can then resume one of the held calls.

End a Conference Call:

  • During a conference call, select End Call.

Speed Dial

1 Do one of

  1. Press the following:Home

      key.
    • Go to Directories, and then select Contact Directory. .
    • Select OnContact theDirectory Linesor screen,Call press a key for an available line (+)List.

    2.

  2. Select a contact.

    3.contact Selectand press the EditInformation.

    4. Selectsoft key.

  3. Press the FavoriteMore Index,soft andkey.
  4. Press thenthe addAdd aFav newsoft number.

    key.

Favorites display as speed dials on the lines screen.

Call Favorites:

From the Favorites List:

    1. Press the Home key.
    2. NavigateGo to Directories and select Favorites.Favorites.
    3. Select a contact from the list.
    4. Press the Dial softkey.

From the Lines Screen:

  • Select a line key associated with a favoritefavorite/speed dial on the Lines screen.
  • The phone places a call to the favorite automatically.

Voice Message

The message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power indicator LED slowly flashes red.

To listen to voice messages:

  1. Press the VMail Gosoft tokey or press the Home key and select Messages.
  2. Select Messages Center.
  3. Select Connect and followFollow the voice prompts to listen to your voice messages.

Recent Calls

Do one ofUsing the following:Home key:

  • Go to Directories and then Call Lists.
  • Go to Recent Calls.

From the Home Screen:

  • Press the Recent Calls soft key.

The Recent Calls list displays all call types, with the most recent displaying first. From the list, you can:

  • Sort, order, and filter calls by type
    • Select More and then Sort
      • Time
      • Name
    • Under Order
      • Ascending
      • Descending
    • Under Type
      • Missed calls
      • Received Calls
      • Placed Calls
  • Delete calls from the list
    • Select the record
    • Navigate to the call record, and then select Information
    • Select Delete
  • View call details
    • Select the record
    • Navigate to the call record, and then select Information
  • Save a call to contacts directory
    • Select the record
    • Navigate to the call record, and then select Information
    • Select Add to Contacts

Contact Directory

To add a contact:

1. Do one of the following:

  • Go to Directories and then Contact Directory.
  • On the Lines screen, hold and press a key for an available line (+).

2. In the Contact Directory, select Add.

3. On the Add Contact screen, enter your contact’s phone number in the Contact field. All other fields are optional.

4. Select Save to accept the change.

To edit a contact:

1. Do one of the following:

  • Go to Directories and then Contact Directory.
  • Go to Menu then Directories then Contact Directory.

2. In the Contact Directory, do one of the following:

  • Select the contact.
  • Navigate to the contact, and then select Information.

3. On the contact information screen, select Edit.

4. On the Edit Contact screen, update the contact’s information.

5. Select Save.

To delete a contact:

1. Do one of the following:

  • Go to Directories and then Contact Directory.
  • Go to Menu then Directories then Contact Directory.

2. In the Contact Directory, do one of the following:

  • Select the contact.
  • Navigate to the contact, and then select Information.

3. On the contact information screen, select Delete.

4. Select Delete to delete the contact.

Volume Adjustment

Press image.png to adjust the volume.

Back to top