Basic Usage for the SIPT44U/T44W

Place Call

Using the handset:

1. Pick up the handset.
2. Enter the number and press Send.

Using the speakerphone:

1. With the handset on-hook, press .
2. Enter the number and press Send.

Using the headset:

1. With the headset connected, pressto activate the headset mode.
2. Enter the number and press Send.

During a call, you can alternate between the headset, hands-free speakerphone and handset modes by pressing the Headset key, the Speakerphone key or by picking up the handset. Headset mode requires a connected headset

---

End Call

---

Using the handset:

• Hang up the handset or press EndCall.

Using the speakerphone:

• Press  or EndCall.

Using the headset:

• Press EndCall.

---

Redial

• Press  to enter Placed Calls list, press  or to select the desired entry, then press  or Send.
• Press  when the phone is idle to dial out the last dialed number.

---

Call Mute

• Press  to mute the microphone during a call.
• Press  again to unmute the call.

---

Call Hold and Resume

To place a call on hold:

• Press Hold during an active call.

To resume the call, do one of the following:

• If there is only one call on hold, press Resume.
• If there is more than one call on hold, press  or to select the desired entry and press Resume.

---

Call Transfer

You can transfer a call in the following ways:

Blind Transfer

1. Press Trans key during a call.
2. Enter the number you want to transfer to.
3. Press B Trans.

Semi-Attended Transfer

1. Press Trans key during a call.
2. Enter the number you want to transfer to and press Send.
3. Press Trans key when you hear the ring-back tone.

Attended Transfer

1. Press Trans key during a call.
2. Enter the number you want to transfer to and press Send.
3. Press Trans key when the second party answers.

---

Call Forward

To enable call forward:

1. Press the Menu when the phone is idle, and then select Features > Call Forward.
2. Select the desired forward type.
   Always Forward — Incoming calls are forwarded unconditionally.
   Busy Forward — Incoming calls are forwarded when the phone is busy.
   No Answer Forward — Incoming calls are forwarded if it is not answered after a while.
3. Enter the number you want to forward to. For No Answer Forward, press  or  to select the desired ring time to wait before forwarding from After Ring Time field.
4. Press Save to accept the change.

---

Call Conference

1. Press Conf during an active call. The call is placed on hold.
2. Enter the number of the second party, and press Send.
3. Press Conf again when the second party answers. All parties are now joined in the conference.
4. Press EndCall to disconnect all parties.

You can split the conference call into two individual calls by pressing Split.

---

Speed Dial

To configure a speed dial key:

1. Press the Menu when the phone is idle, and then select Features > DSS keys.
2. Select the desired DSS key.
3. Select the SpeedDial from the Type field, select the desired line from the Account ID field, enter a label in the Label field, enter the number in the Value field.
4. Press Save to accept the change.

To use the speed dial key:

• Press the SpeedDial to dial out the preset number.

---

Voice Message

The message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power indicator LED slowly flashes red.

To listen to voice messages:

1. Press  or Connect.
2. Follow the voice prompts to listen to your voice messages.

---

Call History

1. Press the History when the phone is idle, press  or  to scroll through the list.
2. Select an entry from the list, and you can do the following:
   • Press Send to call the entry.
   • Press Delete to delete the entry from the list.
     If you press Option, you can also do the following:
     • Select Detail to view detailed information about the entry.
     • Select Add to Contacts to add the entry to the local directory.
     • Select Add to Blacklist to add the entry to the blocklist.
     • Select Delete All to delete all entries from the list.

---

Contact Directory

To add a contact:

1. Press Dir when the phone is idle, and then select All Contacts.
2. Press Add to add a contact.
3. Enter a unique contact name in Name field and contact numbers in the corresponding fields.
4. Press Add to accept the change.

To edit a contact:

1. Press Dir when the phone is idle, and then select All Contacts.
2. Press  or to select the desired contact, press Option and then select Detail from the prompt list.
3. Edit the contact information.
4. Press Save to accept the change.

To delete a contact:

1. Press Dir when the phone is idle, and then select All Contacts.
2. Press  or to select the desired contact, press Option and then select Delete from the prompt list.
3. Press the OK when the LCD screen prompts “Delete selected item?”.

---

Volume Adjustment

• Press  during a call to adjust the receiver volume of the handset/speakerphone/headset.
• Press  when the phone is idle or ringing to adjust the ringer volume.
• Press  to adjust the media volume on the corresponding screen.

---

Ring Tones

1. Press the Menu when the phone is idle, and then select Settings >Basic Settings >Sound > Ring Tones.
2. Press  or to select Common or the desired account and then press the Enter.
3. Press  or to select the desired ringtone.
4. Press Save to accept the change.